Guide On Measuring The Humidity Levels In Your House

The humidity levels inside the rooms in your home is sometimes neglected when considering the overall temperature of your house. Having said that, it is just as important. Listed below are some of the ways that you can measure the humidity levels inside your house. Without further ado, let’s start:

Ways you can measure the indoor humidity levels in your home

In case you do not have any hygrometer and you want to take care of humidity levels without buying one, there are still some things that you can do which will be discussed below. These methods do not require a hygrometer or the best hygrometer wirecutter.

Use the Ice Cube Method

This method is very simple, providing you with a general understanding of the humidity levels inside your house. In this technique, all that’s necessary is a cup of water and some ice. Ice cube is preferred so that there is no need to cut the ice. Load the cup with water, and put the ice inside the glass. Wait for 3 – 4 minutes, then take a look at the glass. When the glass has got moisture build-up or has some leaking on the exterior, your moisture levels might be excessively high. On the contrary, when there is not any moisture building up, the humidity levels inside your house might be excessively low

Ensure that the cup is not positioned in your kitchen area since the gases that originate from food preparation may change the outcome. The outcome can also be modified by activity within the room, therefore it is recommended to get away from the glass and minimize movements during the waiting time of 3 – 4 minutes.

Wet and dry bulb thermometer method

This method of taking the humidity levels is more complex and requires more material than the previously discussed ice cube method. However, it comes with the added benefits of giving you a greater way of measuring the moisture levels of your house.

To evaluate the distinction amongst the damp and dried out bulb thermometers, you should have a couple of standard glass thermometers. To carry out the moisture test you are going to leave a single thermometer without doing anything to it, and that thermometer will be referred to as the dry bulb. Next, take the second thermometer and cover its bottom using a wet cotton ball and secure it using a rubber band. This second thermometer will serve as the wet bulb. Make sure to apply water that is not hot or cold in dampening the cotton ball.

Once the thermometers are ready, place them in a cardboard, then wait for 5 – 6 minutes. Record the temperatures of the two thermometers after 5 – 6 minutes have passed. After that, find the difference between the wet bulb and the dry bulb, and the value you will get is the depression value. Ultimately, find a relative humidity graph on the internet and compare your results.